Global Dental Suction Systems Market by Product, End Use, Regional Outlook, Industry Analysis Report and Forecast, 2021

The global dental suction systems market size is expected to reach $ 548. 2 million by 2027, increasing to a market growth of 13.4% CAGR during the forecast period. Dental suction uses a rotating vane and pump to provide suction for procedures performed in the dental office.

New York, October 26, 2021 (GLOBE NEWSWIRE) – Announces the Release of the “Global Dental Suction Systems Market by Product, End Use, Regional Outlook, Industry Analysis Report and Forecast , 2021-2027 “-
Suction units are used to remove dental waste from the oral cavity throughout procedures. Dental suction systems are used for two main reasons: high volume suctioning of debris left during procedures and saliva ejectors. The other major type of dental suction, high volume suction, is maintained by the dental hygienist near the dentist’s workplace and sucks up the nearest debris like cleaning paste, amalgam fillings and excess water from dental burs.

The growth of the dental suction systems market is said to be driven by the increase in dental surgeries around the world. Conversely, some of the factors, including the difficulties faced by the market due to a lower number of voluntary dental visits by patients for routine examinations and the lack of patient awareness would pose challenges for players. operating in global dental suction systems for the years to come. However, the huge demand for dental procedures, especially cosmetic dental procedures, and the emergence of next generation technologies in the field of dental suction systems are expected to open new growth avenues for the global dental systems market. dental aspiration.

COVID-19 impact assessment

The outbreak of the COVID-19 pandemic has caused a sharp decline in dental procedures, which has negatively impacted the growth of the market. Regular dental procedures use ultrasonic scalers and turbine handpieces that generate aerosols that are harmful to patients as well as staff. Transmission of the coronavirus throughout the dental procedure can occur through inhalation of aerosols and droplets and through direct contact with oral fluids and mucous membranes of infected individuals.

The growth of dental suction systems is believed to be fueled by the increase in the number of hospital admissions for the treatment of different types of dental diseases. Therefore, one of the main catalyst for the growth of the market is the increasing demand for technically developed and high quality medical vacuum cleaners. There are many recently introduced medical vacuum systems on the market and these systems are designed to create a suction system that simplifies the safe removal of unwanted fluids and gases to ensure sterility throughout life. ‘surgical intervention. These systems are in high demand in the health sector. Conversely, the growth and demand for these systems is likely to slow down due to the enormous cost of maintaining medical vacuum systems.

Market growth factors:

The increase in the number of dental laboratories investing in advanced technologies

The dental industry strongly adopts Computer Aided Design (CAD) / Computer Aided Manufacturing (CAM) due to its superior precision in dental restoration and digital orthodontics. These technologies are extremely useful for fabricating crowns, bridges, dentures and fabricated abutments used in dental restorative procedures. They can also offer custom brackets and removable brackets for orthodontic treatments.

The rapid evolution of dental equipment

In recent years, the dental industry has undergone rapid change due to the development of the latest dental materials. In addition, there has been a significant increase in patient compliance, with a dramatic increase in the demand for minimally invasive procedures. Dental lasers find many applications in surgical procedures such as teeth whitening and gum lifting to eliminate or reduce blood loss and decrease patient discomfort.

Market restriction factor:

Low availability of qualified dental experts

The dental industry is expected to grow due to changing demographics, the adoption of inactive lifestyles, increased awareness of dental care and the increasing prevalence of dental disease. On the other hand, one of the main obstacles to the growth of dental suction systems around the world is the low availability of dental experts. In addition, the patient / doctor ratio is very high, which is unable to meet the growing dental problems in the world, which hinders the demand and growth of dental equipment in the global market.

Product outlook

On the basis of the product, the market is segmented into Wet Vacuum and Dry Vacuum. The dry goods segment is said to show the fastest growth rate during the forecast period. This is due to the advantages associated with these systems. These systems are energy efficient, require low maintenance cost, and have features such as variable speed motor functionality that provides constant extraction power. Additionally, these systems do not need a water connection to operate and can temporarily reconnect to the shop vacuum if the main motor fails.

Outlook end use

On the basis of end use, the market is segmented into hospitals and dental practices. The dental practice segment has achieved the maximum revenue share of the dental suction systems market in 2020. This is due to the increase in the number of dental treatment procedures in different healthcare facilities. People preferred to avoid visiting hospitals and dental offices due to the global COVID-19 epidemic.

Regional perspectives

On the basis of regions, the market is segmented into North America, Europe, Asia-Pacific and Latin America, Middle East and Africa. North America has emerged as the leading region in achieving the maximum revenue share of global dental suction systems in 2020. The region is home to advanced healthcare infrastructure and strong adoption of next-generation technologies would drive the growth of the market. regional market. In addition, the major players are investing heavily in R&D activities and new product launches, thus enhancing the market growth in the region.

The market research report covers the analysis of the major players in the market. Key companies described in the report include Dentsply Sirona, Inc., A-dec, Inc., DentalEZ, Inc. (JEP Management, Inc.), Ko-max Co., Ltd., ADS Dental System, Inc., Eschmann Technologies Ltd., Dental International BV, Cattani SpA, Becker Pumps Australia and METASYS Medizintechnik GmbH.

Strategies deployed in the dental suction systems market

May-2021: Ko-Max introduced the latest vacuum system, “Silence Series” with an improved user interface. The product would provide features such as 360 ° rotation, pipe type with unlimited angle height, box type with dust barriers, and CAM type with connectivity to CAM milling machines. In addition, the product would allow a calm and peaceful working environment while producing less noise.

Sep-2020: Dentsply Sirona has deployed the Purevac high volume exhaust system with mirror tip. The product is developed to provide high volume oral evacuation, visualization, illumination and retraction during dental procedures. It includes the HVE mirror tip which is a large volume evacuation tip with a fixed dental mirror.

Sep-2020: DENTALEZ showcased latest three smart products, viz. Star’s Aeras 500 Elite handpiece, Ramvac’s Aeras compressor and Ramvac’s Aeras vacuum cleaner under the new Aeras smart platform. This platform would allow easier use of the devices for the dentist, resulting in an improved experience as soon as a patient sits in the dental chair.

Jul-2019: A-dec acquired Dean Dental Systems, a supplier of environmentally friendly dry vacuum systems, oil-free compressors and other products including remote controls, tandem vacuum systems and pressure relief valves. water safety. With this acquisition, A-dec would increase its ability to sell Dean Dental Systems as part of its products and services to more customers, expand its product portfolio and design solutions for the dental industry.

Dec-2018: DENTALEZ finalizes the acquisition of Forest, manufacturer of dental operating equipment. With this acquisition, DENTALEZ would expand its diversified and growing dental product offering.

Jan-2018: Becker Pumps launched the latest line of regenerative blowers, the SV series in the United States. The new products would offer superior performance and advanced features at a reduced cost. Regenerative blowers are used in industrial, medical, water treatment, and material handling applications to transfer large volumes of air at lower pressure or vacuum levels.

Scope of the study

Market segments covered in the report:

By product

• Wet suction

• Dry suction

By end use

• Hospitals

• Dental offices

By geography

• North America

o United States

o Canada


o Rest of North America

• Europe

o Germany


o France

o Russia

o Spain


o Rest of Europe

• Asia Pacific

o China



o South Korea

o Singapore

o Malaysia

o Rest of Asia-Pacific



o Argentina

o United Arab Emirates

o Saudi Arabia

South Africa

o Nigeria

o Rest of LAMEA

Profiled companies

• Dentsply Sirona, Inc.

• A-dec, Inc.

• DentalEZ, Inc. (JEP Management, Inc.)

• Ko-max Co., Ltd.

• ADS Dental System, Inc.

• Eschmann Technologies Ltd.

• Dental International BV

• Cattani SpA

• Becker Australia pumps

• METASYS Medizintechnik GmbH

Unique offers

• Comprehensive coverage

• The largest number of tables and figures on the market

• Subscription-based model available

• Best price guaranteed

• After-sales research support guaranteed with 10% free customization
Read the full report:

About Reportlinker
ReportLinker is an award winning market research solution. Reportlinker finds and organizes the latest industry data so you get all the market research you need – instantly, in one place.


CONTACT: Clare: [email protected] US: (339)-368-6001 Intl: +1 339-368-6001

Comments are closed.